MC4 & EVO2 socket wrench insert to 3/8" drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
plastic slips beyond 1 Nm. Will need a C clamp. Published as starting point for others to design a better one
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 117
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original tools:
($49.95 for only socket wrench insert) https://solartoolsusa.com/socket-wrench-insert-mc4/
($1142.86 for the whole kit) https://www.currentconnected.com/product/staubli-mc4-and-mc4-evo-2-tool-kit-ul/
3.5 Nm to 4.5 Nm source: https://www.youtube.com/watch?v=TfHsCjCEYI4&t=573s
My attempted settings:
Material: PETG Basic
Nozzle: 0.4mm
Wall loops: 6
Infill: 35%, rectilinear
You can try using a C clamp around the opening and see if it works. Nevertheless, I posted the model for others to try their hand at remixing a better version.
Otherwise, I'd recommend this setup instead: