1 / 5
Sovol Zero Umbilical Fix Strain Relief
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fix the umbilical cable to the 1515 extrusion.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 33
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
[Initial Release] 20251224
I had a print failure in the first week of ownership due to umbilical cable caught by extruder wheel.
The umbilical cable needs to be fixed to the frame and hence this design.
Everything printed in ASA.
Printed washer works fine. The M2.5 T-Nut needs finer layer height and it works okay. It needs to be dropped in using the circled hole on the 1515 extrusion. Generic M2.5 nut or other design shall work too as long as you can fit via the hole.