Bosch Unlimited 10 to Dyson Gen5Detect adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enables using Dyson Gen5Detect accessories with Bosch Unlimited 10 vacuum cleaner.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 1
- Views
- 205
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This adapter allows you to use Dyson Gen5Detect accessories with the Bosch Unlimited 10 vacuum cleaner.
I was annoyed that the Bosch vacuum doesn’t support a flexible hose, so I designed this adapter in FreeCAD to solve that problem.
You need to print three parts:
Main adapter body
Button
Cover
Required tools and hardware:
A screwdriver
A hobby knife
One 7 mm × 30 mm spring (at least that's what amazon claimed)
Four M2 × 10 self-tapping screws
Print settings:
0.1 mm layer height
No brim
Auto-generated tree supports (No supports required for the cover)
100% infill for the button
I printed the main body and the button vertically, but you may want to experiment to see what works best on your printer. Feel free to rotate the parts in the slicer.
⚠ Important!
The parts are designed with 0.2 mm clearance, but you will almost certainly need to do some post-processing:
Use a hobby knife to remove excess plastic from the cover’s edges and from areas that touched the supports
Check whether the button’s tip is too long—I had to trim a small amount of plastic from mine
Big thanks to MangoJelly Solutions for FreeCAD, the best FreeCAD tutorials you can find! I wouldn't have been able to complete this project without them!