1 / 5
Sovol SH02 fan mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement fan mount for the incredibly noisy Sovol SH02 filament dryer fan.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 93
- Makes
- 0
- Views
- 840
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a mount for a 40mm fan for the Sovol SH02 filament dryer. The stock fan is really noisy and irritating. I used a Noctua NF-A4x20 for this mod, but any three wire 40mm fan will work. You must use a 3 wire fan with PMW/FLX or the dryer will not turn on. It is also necessary to trim some of the ribs on the dryer, or the fan mount won't fit.
Print Settings
Layer height: 0.20 mm
Walls: 2–3
Infill: 10–15% (Grid/Gyroid)
Supports: Yes
Material: PETG or ABS recommended