Finial for dowel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: Finial-9x7Pr.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Finials for use on wooden dowels for hanging fibre art
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Finials to cap the ends of dowels for hanging fibre art pieces. This design is for nominal 3/8" wooden dowels. The actual pocket diameter is 9.7 mm, which is a snug fit on standard dowels. This can be easily adjusted in the FreeCAD file.
The examples in photos were printed on a Prusa CORE One with Prusament PETG. Each pair uses 1.34 m and takes 30 minutes.
I have included the following:
FreeCAD: Finial-9x7.FCStd
Export: Finial-9x7.3mf
PrusaSlicer: Finial-9x7Pr.3mf
BGCODE: Finial-9x7Pr.bgcode