Airless Basketball - The "Homebrew" Respin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An open source airless basketball with a different approach to the lattice.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 82
- Makes
- 0
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This project is a evolutionary overhaul of the open-source airless basketball, I wanted to try a unique lattice structure outside of the "typical" honeycomb substrate. The geometry has been fundamentally optimized with some different approaches to strutting a space frame inspired structure with sub divisional modeling.
New Feature: The 3D Sine Wave Texture
The byproduct of the triangulated lattice also addresses a somewhat issue of "slickness" in 3D-printed elastomeric polymers, which adds some more exterior texture via a "3D sine wave" - it's a bit more tactile than a smooth surface interface.
🛠 Technical Printing Specs: The "Solid-Core" Strategy
This respin moves away from the "fine detail" philosophy of 0.4mm nozzles in favor of structural mass and mechanical bond strength of a larger 0.6mm nozzle.
You could print it with a 0.4mm nozzle for detail; however, in my experience, 0.6 with a 0.3mm layer gives a bit more "bounce"
Nozzle Diameter: 0.6mm. The larger bore creates more layer adhesion (and slightly quicker printing time)
Layer Height: 0.3mm. This layer optimizes for the rebound ratio. When the 0.6mm bead is pressed down at 0.3mm, it gets a touch more into the previous layer for improved layer adhesion which can affect resiliency of the elastomeric that it is printed from.
Infill: 100% (Solid Struts). To ensure the energy return of the PEBA/TPA is fully realized, the lattice struts must be printed at 100% infill. This ensures there are no internal voids within the "bones" of the ball, allowing force to travel through the material rather than being lost in air gaps.
Print Speed: 15–25 mm/s. These high-rebound materials are notoriously difficult to control. Printing slowly ensures that the 0.6mm beads are laid down with perfect precision and maximum thermal bonding.
It may be worth considering to anneal the ball post printing for best results and durability.
🧪 Material Recommendations
PEBA / TPA: These are the "gold standard" for this project. They offer the lowest energy loss and highest rebound, acting more like a pressurized system than a traditional plastic.
High-Elasticity TPE: A great alternative for those looking for extreme durability and a more rubberized, dampened feel.
Some other alternative highly modified "PLA HR's" that are specifically compounded for 3D printed basketballs.
