Return to Castle Wolfenstein 65.4x39.6x1cm logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Well it's just the RTCW logo I made as a gift for my friend who really liked the game.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 50
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
This is an unofficial, fan-made model.
The Return to Castle Wolfenstein name and logo are trademarks of their respective owners.
This model is shared for personal, non-commercial use only and is not endorsed by or affiliated with id Software / Bethesda / Activision / etc. I downloaded the logo as PNG, converted it to SVG using an online converter, then turned it into an STL using Tinkercad and finally cut using CrealityPrint and saved as 3MF - to fit four 22x22cm plates in my Creality Ender 3 V3. If it breaks rules then very sorry and please take it down.
Printing the "external" requires to pause in between layers and swap from black to white. Or use AMS... I don't have one so the 3mf files are not prepared for this, sorry! The "internal" is to be printed in dark red. I used eSUN PLA+ matte black, milky white and fire red.
I glued the "external" black-white together with the "internal" red using Cyanoacrylate glue. The red part looks nice because I flipped it upside down and then printed - that way you get the PEI rough finish on top (well at least if you have the non-flat PEI plate...) which is sparkling and beautiful with this filament. I'm not sure if the model is saved flipped though (:D) so just download and check ;). Maybe ironing would do the job as well? I didn't know about it yet. The esun pla+ fire red filament looks way better on the plate side than top without ironing.