Rengoku Demon Slayer Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rengoku Demon Slayer Hueforge
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 4.32mm and the Actual Thickness is 4.2329mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#55351c PLA+ Esun Brown Transmission Distance: 1.5
#212322 PLA Paramount 3D Stealth Gray Transmission Distance: 2.6
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#f56233 PLA Jessie Premium Mystery Orange Transmission Distance: 5.4
#f1d335 PLA PolyLite Lemon Yellow Transmission Distance: 6.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #22 (1.84mm) swap to Brown
At layer #24 (2mm) swap to Stealth Gray
At layer #26 (2.16mm) swap to Maroon Red
At layer #30 (2.48mm) swap to Mystery Orange
At layer #35 (2.88mm) swap to Lemon Yellow
At layer #40 (3.28mm) swap to Yellow
At layer #44 (3.6mm) swap to Jade White for the rest.