Pepper-Grinder Spring-Ring replacement fits for Zassenhaus
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.05 – €0.06 net (excluding VAT)
For file: zassenhaus clip_0.2mm_PLA_MINI_2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 2.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a Ring that holds the Spring with the grinding unit in place.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
If the ring breaks the grinder is not usable anymore, therefore i designed a replacement.
I had to split the ring in two parts which clips togehter if mountet so that it doesn't fall off. You need to use a 0.4mm nozzle. And maybe rework a tiny bit of the nose, depending on your printer, so that it perfectly fits together.
Inner diameter is 4mm
I used PLA
Keep me updated if it works with your mill.