Ikea BILRESA switch wall support frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The new IKEA BILRESA switch magnet is not strong enough and it keeps falling down. This is a frame for the switch.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 92
- Makes
- 1
- Views
- 814
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The new IKEA BILRESA switch magnet is not strong enough and it keeps falling down. This is a frame for the switch.
Use two small command strips to stick it to your surface or wall.
IMPORTANT:
Install command strips
Slide the frame over the BILRESA switch with the bottom part of the switch sticking out for alignment with the original metal holder. Notch facing DOWNWARD!
Place the switch on the IKEA metal holder
Push down the frame to stick to the wall or surface to make perfect alignment
To remove the switch, use something pokey, stick it in the hole that usually removes the switch-cover and pull it out the frame