Anti-Wobble Z-Axis Cover for QIDI X-plus3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-axis cover that wobble prevention effect suppresses layer lines. このZ軸カバーは軸ぐらつきを解決し、積層を整えます。
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Anti-Wobble Z-Axis Cover
Although the X-PLUS3 has excellent layering, there is still some wobble due to a structural flaw in the Z-axis top bearing. When this cover is snapped onto the bearing, the cushioning rubber is compressed, which eliminates the wobble and suppresses the layer lines, making them less noticeable.

X-PLUS3は優れた積層精度を誇るものの、Z軸上部ベアリングの構造上の欠陥により若干のガタつきが生じます。本カバーをベアリング上に装着すると、緩衝ゴムが圧縮され、ガタつきを解消するとともに積層痕を抑制し、目立ちにくくします。
Test print shows a slight yet significant difference.

The bottom left is the default, and the top right is after use.

The cover's slightly unusual shape is designed to fit tightly to prevent it from being blown off by the side fan's airflow.If it is loose, there is a risk it could be blown off by the side fan during printing, so please be careful. Due to individual variations in each machine, it may be necessary to bend or trim the protruding parts. Additionally, if there are deviations in print accuracy, it could have a negative impact. Therefore, adjustments may be required if the situation worsens after use.