1 / 1
NightOwl connector insert with JST connectors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NightOwl connector insert using 1 or 2 JST connectors with 3/4pins.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NightOwl connector insert using 1 or 2 JST connectors.
I end up using version with XT30 connector for CAN and a 3pins JST connector for a TurtleNeck
I also added version with 3pin JST (for TurtheNeck) and 4pin for CAN or ... version with double 4 pin JST.
I was not sure how to fix the JST connector so I tried to make a tight cut and install by force the JST connector. The tightest one is ending with 000 then more wide by 0.25mm (file name ending with 025) and 0.5mm (file name ending with 050).