1 / 1
Staubli Metal Open-End Spanner Set for MC4 and EVO2 to 3/8" drive for torquing — image 1

Staubli Metal Open-End Spanner Set for MC4 and EVO2 to 3/8" drive for torquing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

built specifically for the Stäubli PV-MS-PLS kit to use with your own torque screwdriver/wrench (3.5 to 4.5 Nm)

Rating
5 / 5
Likes
6
Downloads
23
Makes
0
Views
385
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Use with the official staubli metal open spanner set: https://www.currentconnected.com/product/staubli-pv-ms-pls-open-end-spanner-set/

Recommended settings:

  • Material: PETG Basic

  • Nozzle: 0.4mm

  • Wall loops: 6

  • Infill: 35%, rectilinear

To use, just snap it on, and it should work. Torque the cap nuts 3.5 to 4.5 Nm. Torque wrenches usually aren't sensitive enough for lower values, but if you are using one, make sure the bar is 90º to the spanner for torque values to be accurate.

Feel free to remix to adapt it to other spanner variants.

3.5 Nm to 4.5 Nm reference: https://www.youtube.com/watch?v=TfHsCjCEYI4&t=573s

Tags