Anycubic i3 Mega S Filament 180deg turner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can be used on stock Anycubic i3 Mega S printer - to adapt it with top placed bobin holder helps to make footprint small
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
there are a few similar designs, but they are flat and are working not to good with the stock filament presence sensor, due to its shifted position. My model is solving that problem.
for attachment is used the same holes that already exist. M3 screws should be removed and changed on to M3x20 set screws (https://www.amazon.de/Axial-Set-Screw-M3x20mm-Black/dp/B003Z6OE2Q)
4 pcs M3 nuts (https://www.amazon.de/Sechskantmuttern-M3-Verzinkt-Stahl-Sechskantmutter/dp/B0CKQ3LZ49?source=ps-sl-shoppingads-lpcontext&smid=A1XIX5WZGN23CN)
(2 nuts are holding the frame and 2 other nut holding the Bracket)
M3 or M4 12-13mm outer diameter washers (https://www.amazon.de/FOMGIIN-Unterlegscheiben-Karosseriescheiben-13mm-St%C3%BCck/dp/B0CL4NK566/ref=asc_df_B0CL4NK566?mcid=62c4b51b657e3e92b9eb3cbabac8ce85&tag=googshopde-21&hvpos=&hvpone=&hvptwo=&hvqmt=&hvdvcmdl=&hvlocint=&hvocijid=14321730917120148087-B0CL4NK566-&hvexpln=0)
As bobin holder used Box from Aliexpress (https://de.aliexpress.com/item/1005007612443371.html?spm=a2g0o.order_list.order_list_main.70.71491802IHN8k1&gatewayAdapt=glo2deu)
in upside down position
The holder should be equipped with standard 4mm Teflon tube (for low friction)
