Filament Cutter Spring Latch
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.24 – €0.29 net (excluding VAT)
For file: Spring Stiff_0.2mm_PETG_MK3S_20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 19.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a combination of 3D Printy's Spring Latch mount, Pomi's Filament Cutter and No Watermark's Filament cutter
- Rating
- 4.907 / 5
- Likes
- 121
- Downloads
- 421
- Makes
- 48
- Views
- 4,276
- Reviews
- 43
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a combination of 3D Printy's Spring Latch mount, Pomi's Filament Cutter and No Watermark's Filament cutter box.
I made it a bit more hand held friendly, larger and you can mount it to the wall or your enclosure to keep it within hand's reach when needed.
Installation instructions and hardware requirements are in Pomi's make here https://www.prusaprinters.org/prints/67509-filament-cutter-45deg
UPDATED V2 8.7.2022
I adjusted the stopper so the BottomCutter portion should stay in place better now and I removed the filament stopper of the main body so you can insert the filament in as far as you'd like. I also added a model without the mount if you don't intend to mount it. I also uploaded pre sliced .gcode files for petg.