1 / 5
Ender 3 V3 KE Hotend Fan Duct (do no require side screw holes on the motor) — image 1
1 / 5

Ender 3 V3 KE Hotend Fan Duct (do no require side screw holes on the motor)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My V3 KE doesn't have side screw holes on the extruder motor. I modified FabulousD_564891's design to make it work.

Rating
5 / 5
Likes
20
Downloads
79
Makes
2
Views
483
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a remix of FabulousD_564891's model.

Motivation: My V3 KE doesn't have side screw holes on the extruder motor (see image), so FabulousD_564891's model doesn't work for my machine. I have to redesign the upper part of his model.

My model uses the screw holes on the metal bracket of the hotend (see image). No extra screws are needed. For installation, you may have to push the prints slightly (see image).

Materials: PETG (PLA should be fine too)

Print settings:
    Wall loops = 3.
    Infill = 20%.
    First layer speed = 50 mm/s. 
    First layer infill speed = 50 mm/s.

Support: None. (You have to reorient the model in the slicer.)

Updates:
    2026/01/07 Add "Hotend_Fan_Duct_v2.stl":
        Revise the dimensions of the upper component to make the installation easier.
        Improve the fan wire recess.
   2026/01/11 Add "Hotend_Fan_Duct_v3.stl":
        Increase the clearance between the duct and the build plate to improve air flow.
   2026/01/15 Add "Hotend_Fan_Duct_v4.stl":
        v3 is slightly twisted on my v3 ke. v4 fixes this issue.