K1C Unibody Riser Stronger Hinges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stronger and beefier version of the original hinges.
- Rating
- 4.5 / 5
- Likes
- 26
- Downloads
- 170
- Makes
- 2
- Views
- 884
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A slightly stronger version of the original K1C Unibody Riser Hinge, using bolt and nut. Feel free to edit on my Tinkercad.
HOW TO BUILD
TIP : You can use rubber washer with lock nut to make friction hold hinges.
PARTS LIST
These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍
(4X) M3*8 Screws
(2X) M5*25 Screws
(2X) M5 Nuts | M5 Lock Nuts
(2X) M5 Washers | M5 Rubber Washer
PRINT SETTINGS
Mostly follows the original.
0.2mm layer height, 25% gyroid infill.
Rotate beam 45 degrees and lay flat.
Both hinges can be laid and printed flat.
A little bit of supports for the screw holes will be nice.