Under Printer Storage Tray for Prusa i3MK3s
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the design linked below
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 2
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the linked design, adding holes to allow for the tray to be secured to the printer frame using M3 x 8 screws and a capture nut like this one. I removed the angled corners and the slots for the dividers to better suite my storage needs. I also designed a simple lid with a finger slot to hide the clutter. There is room to run the ribbon cables under the Y axis belt or you can run them flat under the bin. It is possible to install the tray without disassembling the frame if you are careful to line up the nuts with the holes. There is adequate clearance for the print bed to clear the bins. I suggest you move your print bed back and forth after installing to ensure adequate clearance.
Overall dimensions: 200 mm X 200 mm X 38 mm