Halterung für Sony Optiarc AD-7260S DVD Laufwerk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Halterung für Sony Optiarc AD-7260S DVD Laufwerk
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
DEUTSCH
Dies ist ein 3D-Modell zum 3D-Drucken für das DVD-Laufwerk Sony Optiarc, Baujahr 2011, Modell AD-7260S.
Die Halterung wird von oben in das Laufwerk gedrückt und sitzt passgenau mit leichter Überpressung. Zum Herausziehen aus der Halterung sind etwa 3 kg Zugkraft erforderlich, was einen festen und sicheren Sitz gewährleistet.
In der Grundplatte befinden sich vier Bohrungen mit 6 mm Durchmesser, mit denen die Halterung zusätzlich auf einer Oberfläche verschraubt oder befestigt werden kann.
Die Halterung wurde entwickelt, da ein sehr kleines Desktop-Gehäuse verwendet wird und das Laufwerk deshalb extern auf dem Gehäuse montiert ist. Das Sony Optiarc AD-7260S gilt als eines der leistungsstärksten Retro-DVD-Laufwerke aus dem Jahr 2011 und eignet sich besonders für Retro-Gaming, Oldschool-Windows-Systeme (z. B. Windows XP) sowie DVD-Nutzung.
Hinweis zur Kabelführung: Sind hinten zwei Kabel angeschlossen, können diese bei direkter Bodenauflage leicht anstoßen oder blockieren. In der gezeigten Nutzung hängt das Laufwerk so, dass die Kabel frei nach unten hängen. Alternativ kann eine Zwischenplatte untergeklebt oder das Modell insgesamt höher ausgeführt werden, um mehr Bodenfreiheit zu schaffen.
ENGLISH
This is a 3D-printable model designed for the Sony Optiarc DVD drive, year 2011, model AD-7260S.
The holder is pressed into the drive from the top and fits precisely with a slight interference fit. About 3 kg of pull force is required to remove the drive from the holder, ensuring a tight and secure fit.
The base plate includes four 6 mm holes, allowing the holder to be additionally mounted or screwed onto a surface.
The holder was designed for use with a very small desktop case, where the drive is mounted externally on top of the case. The Sony Optiarc AD-7260S is considered one of the most powerful retro DVD drives from 2011 and is especially suitable for retro gaming, old-school Windows systems (e.g. Windows XP), and DVD usage.
Cable note: When two cables are connected at the rear, they may touch or slightly obstruct the surface if the drive is placed directly on it. In the shown setup, the drive is mounted so the cables hang freely downward. Alternatively, a spacer plate can be glued underneath, or the entire model can be made higher to provide additional clearance.
