1 / 3
Wall anchor Ytong (AAC)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ytong (AAC) Wall anchor
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wall anchor for Ytong (AAC) (Those white chalky building blocks :-) )
For wood screw Ø3-Ø5 x 20-30 mm
How to use :
Drill a Ø6 mm hole ±35 mm deep, a standard drill will do as this is very soft material.
Use the tool to hammer the plug in, flush to the wall is deep enough.
Need another size ?
A parametric fusion model is attached.
Change User Parameter value:
ID_scrw = Inner diameter of the thread on the screw, if you are not able to measure multiply the outer diameter by 0.65
L_scrw = Length of the screw
OD_scrw = Outer diameter of the screw
The plug and the tool should adapt to the screw dimensions. :-)