Lego Speed Champions F1 20cm vertical mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Veritical mount for Lego Speed Champions 20cm cars.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 117
- Makes
- 1
- Views
- 810
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
I designed this model in tinkercad after trying another similar model here which failed to print properly twice. So figured I could do my own and make it so the vertical wall is printed face down to give it a better finish. The other model has a very restrictive license, so I created this without using any of the other model's parts or measurements.
The F1 logo is from @Vector3dArt https://www.printables.com/model/203043-formula-1-logo-3d-freestanding-f1-logo - I have included a resized-only version this in this download for convencence and will mirror that license. Credit to @Vector3dArt. This model should not be considered a remix of the F1 logo.
The stand itself is printed in 4 parts. The wall is supplied front-side-down and ideally is printed on a satin or textured plate for a good finish. The wheel hooks, printed on side for opimal strength, are designed to clip in and should support the weght of the car without falling out. The vertical load should keep them in place. Feel free to use a dab of superglue if you feel the need.
My prints are done in Marble PETG on 0.6 Obxidian @ 0.25mm.
The F1 logo print has a colour change on the 4th layer so the base of it is marble to match the base, and rest in red. You may need to gently trim the base layer with a knife to make it fit into the hole depending on your printer's nozzle size and tolerances.