Large Dessicant Drying Tray with Spout and Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Like most people, I didn't like the models I found on Maker World, so I made my own.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Like most people, I didn't like the models I found on Maker World, so I made my own. This is a large desiccant drying tray (recommend printing in ABS/ASA for temperature resilience.) The infill pattern and side wall patterns are small enough that standard Dry&Dry beads will not fall through. The profile is set to print at .28 for a .4 nozzle for maximum speed (does not affect quality), but the spout cap should be printed in .08 for maximum layer adhesion. Thanks for coming to my TED Talk.
Make sure for the base and lid that the top and bottom layers are set to “0”, and for the spout cap, that the top and bottom layers are at least “2” each. All other settings don't really matter and shouldn't affect the print