1 / 2
VFC FNC Handguard (AIRSOFT)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handguard based on a pindad model (AIRSOFT)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Wall thickness wants to be high, as it will need to be screwed to the metal frame using the original screws, a 2mm drill bit will be needed to pilot the holes in the new handguard. You may need to cut tabs of something like electrical tape to help set the guard off, if its not aligning at the bottom.
Printed in fiberology ASA Olive Green with a 0.4 nozzle