CTEK Charger Mount for Slatwall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a CTEK MUS 4.3 with its stock holder to Slatwall
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this for mounting my CTEK MUS 4.3 Charger bracket to Slatwall along with M5 bolts. (it just threads straight into the part
I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but this is about the best I could come up with. I found it that different areas of wall could be looser/tighter and also different filaments played a role as well. In many cases you will need to file down the little latching nub a bit. Don't force it onto your wall if you feel too much resistance. You can and will damage PVC Slatwall this way.
I have only tested with storeWall as that is the only system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough. I would appreciate any feedback if someone can test these on other Slatwall.
Get 25% off CA Filament by using the following link: http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D