1 / 4
Vanagon LED Resistor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For mounting the resistor that gowesty sells
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My rig has enough holes in it so instead of drilling more I made this.
Sized for PETG
Bolts are M3 anything between 7-12mm should work, #6 should work as well
The tension fit comes from the 4 "bumps" (shown in the last pic) that protrude into the circular hole, make sure you slicer settings are not discarding them.