1 / 5
NEW ARTILLERY SW-X4 EXTRUDER COVER — image 1
1 / 5

NEW ARTILLERY SW-X4 EXTRUDER COVER

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Artillery X4 Cover: Nozzle view, optimized flow & a total glow-up. Tech & aesthetic upgrade for your SW-X4! ✨

Rating
5 / 5
Likes
18
Downloads
163
Makes
1
Views
418
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

NEW ARTILLERY SW-X4 EXTRUDER COVER: The "Glow-up" Mod

Is the stock cover hiding your nozzle? Does your hotend need to breathe better? Or maybe you just think the original design is a bit... boring? This is the upgrade you’ve been looking for.

I designed this shroud for the Artillery Sidewinder X4 to solve the most common frustrations of the community while giving the machine a modern, high-performance look.


🚀 Key Improvements

  • Unobstructed Nozzle Visibility: The "sight window" design allows you to see exactly where the nozzle meets the bed. No more guessing if your first layer is perfect—now you can monitor it from a comfortable front-facing angle.

  • Enhanced Thermal Management: I’ve replaced the restrictive stock vents with an enlarged high-flow grille. This maximizes the exhaust from the heatsink fan, significantly reducing the risk of heat creep and clogs during long prints.

  • Optimized Part Cooling: The internal airflow path has been refined to ensure the part cooling fan hits the plastic exactly where it counts, leading to cleaner overhangs and sharper bridges.


🛠 Recommended Print Settings

To ensure the best durability and heat resistance, please follow these guidelines:

  • Material: PETG, ASA, or ABS (Required). Do not use PLA as it may warp due to the proximity to the heater block.

  • Layer Height: 0.2mm for a good balance of detail and strength.

  • Wall Loops: 3 to 4 walls.

  • Infill: 15-20% (Gyroid is recommended for better structural integrity).

  • Supports: No supports required if printed with the lettering face-down on the build plate.


🔧 Installation

This is a Drop-in Replacement. It uses the original hardware (screws) from your stock Artillery X4 shroud. No extra vitamins or modifications required!


If you like this design, please post your makes! I'd love to see how your "Glow-up" turned out.

Tags