Faceted Wastebasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a wastebasket for my 3D printers so I modified the design I had for a spiral mode faceted vase and made it big.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spiral/vase mode design for a wastebasket that I've found to be a good size next to a 3D printer. I've used 0.8mm and 1.2mm nozzles for these. The orange one with a 0.8 nozzle and a 1.0mm line thickness. The translucent green one I printed with a 1.2mm nozzle and a 1.35mm line width. Print a bunch of bottom layers to give it sturdiness and weight.
Note that even if you're not used to drying your PETG before printing with a 0.4 nozzle you will probably need to dry the filament before printing with this big a nozzle. This will also test the upper bound of your flow rate.