1 / 6
Oil Can Suppressor w/ Barrel Cover and attachments — image 1
1 / 6

Oil Can Suppressor w/ Barrel Cover and attachments

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An oil can suppressor model based on the one from Call Of Duty made for the ZNC AUS, also a few various attachments.

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
239
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

**WARNING**: THIS IS VERY SHARP AT THE FRONT OF THE BARREL. KEEP ALL SENSITIVE BODY PARTS AWAY FROM IT.

**NOTE** THIS IS FOR THE 12 BCAR VARIANT OF THE ZNC AUS. YOU WILL ALSO HAVE TO PAINT IT.(unless you have ams and set a color change)

**NOTE 2** It slides over the 12 bcar barrel.

I wanted to add an attachment for the 12 BCAR of the ZNC AUS, making it look cooler (in my opinion), and I landed on an oil can silencer. When I printed it, it was a little loose around the BCAR, so I just used a few pieces of paper to make it a tighter fit.


I also made a model to cover the bare metal barrel shown on the 12 BCAR variant.

I might make a variant in the future that adds a way to tighten/loosen the suppressor, but for now, I am satisfied.

I also made a sight for it, same with a camera mount, they are both for the RMR plate on top of the blaster.

Camera mount uses 2 M3 screws to mount it in place with 1 M3x20 screw with 1 or more M3 Nut securing the camera box to the mount.

Link to camera mount, it has more context here(also included a file): https://www.printables.com/model/1313185-rmr-camera-mount
The sight is a file.

I printed the oil can at 5% grid infill do more if you wish, supports if needed(i used organic).