1 / 3
Spades Card case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model is printed from 4 parts that should print alright, however check orientation as this is still in 'testing' phase. Assembly is easy: simply insert the sleeve into the case and slip the pin through the hole before locking it in place with the small clip. Don't hesitate to give feedback so as to improve the design.
card pack size : around 87x57x17mm