3d Model for Pogo Pin Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d model of the 4 pin female and male connector made by RTLECS with 2.54mm pin spacing.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 238
- Makes
- 0
- Views
- 626
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
After multiple unsuccessful prints, I spent the time designing an accurate model of the two connector halves.
The connector I have is the 4 pin version with ears and attached wires: https://de.aliexpress.com/item/1005006470782095.html
This is what they look like (in case the link stops working):
The pins have a spacing (= pitch) of 2.54 from center to center. The model could be adapted for different sizes by simply adding or removing pins.
The dimensions of the model are based on the images in the description of the listing:
Note that this image is incorrect for some dimensions (this one says 20.44mm for the outer hole spacing, but it is actually 20.88mm like in the image below). After I noticed that they don't match, I used this image (in the description as well):
