Mold for Prusa Mini socks
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.18 – €2.67 net (excluding VAT)
For file: Gcode - PLA -ALL / top_02mm_pla_mini_2h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.42 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.44 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mold is based on CNC Kitchens. Watch his video for complete instructions.
- Rating
- 4.882 / 5
- Likes
- 224
- Downloads
- 976
- Makes
- 14
- Views
- 9,131
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This mold is based on CNC Kitchens. Watch his video for complete instructions.
Standard E3D Socks can be used as well, but they will sit loose. Socks from this mold instead will have a perfect fit.
There is a topic in the Prusa Forum for questions, discussions, and recommendations.
You will also need 3x M3 nuts, 3x M3 35mm screws (or longer) and some (about 4g per sock) temperature resistant silicone.
One edge of the mold is marked with "TOP". Make sure that this edge is always the highest point, so that bubbles rise into the bubble trap.
Tip to remove the bubble trap:
- After the sock is cured only remove the top part.
- Use a sharp blade to cut the bubble trap along the frame.
- Remove the sides and the bottom, but leave the core.
- Put the sock upside down on a cutting board and cut away the rest of the bubble trap.
Now you can remove the core and do the rest of the cleanup with your fingers and a flush cutter.
Print instructions
Recomentations:
| minimal | optimal (needed for logo version) |
|
|---|---|---|
| material | PLA | PLA |
| nozzle | 0.4 | 0.25 |
| layer height | 0.2 | 0.1 |