1 / 4
Classic Mini Bonnet Prop Clip (Replaces CZH209) — image 1
1 / 4

Classic Mini Bonnet Prop Clip (Replaces CZH209)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small printed clip that replaces the metal bonnet prop / rod clip on classic Minis.

Rating
0 / 5
Likes
9
Downloads
36
Makes
1
Views
149
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

A little plastic clip to replace the original metal bonnet stay clip on a Mini (Part Nr. CZH209) if it breaks like mine did.

 To install, insert the bottom bit in the slit in the bonnet and then rotate the part 90° to the right to lock it in place.

 Be careful not to use too much force rotating the clip or it will break.

 If turning is not possible, check to see if the sheet metal around the slot is even.

 Tested on a Mini SPI with a bonnet rod diameter of about 6,25mm.

 Print with the flat side down (as uploaded), so that the layers go alongside the clip.

 Print with 4 walls and support at 0.2mm or 0.16mm layers in PETG or similar heat-resistant material.

 

Fusion and step file attached, feel free to remix!

Tags