PCI slot brackets for DataPath VisionAV-SDI (Model 199)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are brackets for the DataPath VisionAV-SDI Model 199 that come from embedded systems.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are brackets for DataPath VisionAV-SDI Model 199 capture cards that come from MediaSite R1040 Pro Recorders (or other such embedded systems) and therefore do not have PCI brackets by default. The 15 pin connector (VGA) daughter board is on a separate bracket to allow for more positioning options.
Print material: PETG (Recommend petg or higher temp filament to handle ambient PC case temperatures).
2x 3-5mm M3 screws needed to attach the reinforcement connector to the main bracket. Lower profile screw heads recommended to avoid obstructing the HDMI input.