1 / 5
Ryobi 18V power supply for Xiegu G90 — image 1
1 / 5

Ryobi 18V power supply for Xiegu G90

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Electronics enclosure merging a Ryobi battery adapter and 13.8V step-down converter.

Rating
0 / 5
Likes
6
Downloads
24
Makes
0
Views
264
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

In my ongoing effort to Ryobi the world, this is an electronics enclosure designed to combine a Ryobi battery adapter with a 13.8V step-down converter. It provides a clean, compact way to power projects directly from Ryobi batteries. Motivation for this design was to power my Xiegu G90 HF radio. 

This enclosure requires an additional printed part for the Ryobi battery connection. See the link below.

The design is intended for makers comfortable with basic wiring and electronics assembly. All electronics mount securely inside the enclosure, and the lid fastens with standard M3 hardware.


Required Printed Parts

  • Ryobi 18V Battery Connector

    Note: This build requires wiring and AA battery contacts as part of that print.


Hardware & Electronics Needed

  • 10× M3x4x5 heat-set thread inserts

  • 4× M3x8mm screws (attach the lid)

  • 6× M3x12mm screws (attach the battery connector)

  • 1× G90 cable assembly - or any other power cable 

  • 1× Step-down converter
    https://a.co/d/66tgUGi

  • 4× Lever wire connectors
    https://a.co/d/4UTwBZq

Tags