Ventilation Trim Split Flange 6 in
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a split flange for covering the rough cut hole in drywall if you run 6in hard pipe ventilation.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I needed a simple cover for the cut out that this 6in vent duct goes through in the wall. This split flange allows the trim to be added after the duct is run through the rough cut hole. It will cover a gap of up to 1in and uses standard 1in drywall screws countersunk into the flange.
Printed on Centauri Carbon
0.4 mm Nozzle
0.2 mm layer height
Elegoo Rapid PETG
3 wall loops
15% sparse infill, gyroid
No Supports (orient the flange to eliminate the overhang)
I'm including the FreeCAD file in case someone wants to resize it to a smaller duct.