1 / 4
Screw and double sided tape velcro mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick print to mount 11.5mm wide Velcro to a surface, one version for double sided tape or countersunk screws.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
This is just a simple model to mount 11.5mm wide Velcro to a surface, one version for double sided tape or countersunk screws.
I designed this to be printed at an angle as I wanted the "top plate" of the velcro part to be smaller than the bottom.
The screws I used were 4mm in diameter countersunk with a head diameter of 7.6mm. Just happen to be some wood screws I had lying around
maybe someone else will find use for this :)