1 / 2
Chainstay frame plug for my Specialized Tarmac SL8 Pro 2026 — image 1
1 / 2

Chainstay frame plug for my Specialized Tarmac SL8 Pro 2026

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plug to close the cable/wire outlet on my Specialized Tarmac SL8 Pro 2026 road bike

Rating
1 / 5
Likes
1
Downloads
13
Makes
0
Views
125
Reviews
1

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial

A) NOTICES (herunterscrollen für deutsche Version / scroll down for German language version)
Non-commercial provision of construction files in . stl-format for a chainstay frame plug for my Specialized Tarmac SL8 Pro road bike by the author of the file.

THE CONSTRUCTION FILES ARE PROVIDED "AS IS". THE AUTHOR DOES NOT PURPORT AND DOES NOT REPRESENT, WHETHER EXPRESSED OR IMPLIED, THAT THE CONSTRUCTION FILES ARE FREE OF ERRORS, FREE OF FAULTS AND USABLE FOR ANY PURPOSE: THE AUTHOR IS NOT AN EXPERT IN 3D CONSTRUCTION AND NO EXPERT IN ENGINEERING. THE AUTHOR DOES NOT ACCEPT ANY RESPONSIBILITY NOR LIABILITY OF ANY KIND FOR THE USE OF THE CONSTRUCTION FILES, REGARDLESS OF THE PURPOSE; THE LIABILITY FOR ANY DIRECT AND INDIRECT DAMAGE IS DECLINED.

The use of trademarks, tradenames and other marks of third parties, if any, serves solely descriptive purposes pertaining to the construction files; the trademarks, tradenames and other marks of third parties are and remain the sole property of such third parties.
In case of collision between this English and the German language version below, the German language version below governs the interpretation.

HINWEISE (scroll up for English language / aufwärts scrollen für englische Version):
Nicht-gewerbliche Zurverfügungstellung von Konstruktionsdateien im .stl-Format für einen Kettenstreben-Verschluß für mein Specialized Tarmac SL8 Pro Rennrad durch den Autor der Konstruktionsdateien.

Die Konstruktionsdateien werden „wie vorliegend“ zur Verfügung gestellt; der Autor behauptet nicht und gewährleistet nicht, daß die Konstruktionsdateien fehlerfrei, richtig konstruiert und für irgendeinen Zweck nutzbar sind. Der Autor ist kein 3D-Konstruktionsexperte und kein Ingenieur. Der Autor übernimmt für jegliche Nutzung der Konstruktionsdateien, gleich zu welchem Zweck, keinerlei Haftung, weder direkt noch implizit. Der Autor übernimmt für die Konstruktionsdateien an sich, für deren Fehlerfreiheit und Nutzbarkeit in jeglicher Art und Form keinerlei Haftung.

Soweit Marken, Firmenbezeichnungen, Handelsnamen und sonstige Kennzeichen Dritter genannt werden, dienen diese Nennungen ausschließlich der Beschreibung der Konstruktionsdateien; die Marken, Firmenbezeichnungen, Handelsnamen und sonstigen Kennzeichen Dritter stehen im ausschließlichen Eigentum dieser Dritten.
Im Falle der Kollision dieser deutschen und der obenstehenden englischsprachigen Version hat diese deutsche Version Vorrang.

B) COMMENTS (herunterscrollen für deutsche Version / scroll down for German language version):

As the chainstay of my Tarmac has a somewhat oval opening on the underside for cable/wire routing which is not needed for my wireless SRAM derailleur, I wanted to close it to prevent the frame from collecting dirt inside. I believe Specialized offers an official part for that purpose, but I could not find it. Using flexible material my part was easy to insert and has stayed in place now for several hundred kilometers. Surface of pictured part is ugly, sorry for the sloppy print, as I was in a hurry to take the new bike for vacation on the same day.

KOMMENTARE (scroll up for English language / aufwärts scrollen für englische Version):
Da an der Unterseite meines Tarmac eine leicht ovale Öffnung in der Kettenstrebe für eine Kabelführung ist, die ich wegen meines kabellosen SRAM-Umwerfers nicht benötige, wollte ich die Öffnung schließen, um die Ansammlung von Schmutz im Rahmen zu vermeiden. Ich glaube Specialized bietet ein offizielles Teil an, ich konnte es aber nicht auftreiben. Durch Nutzung flexiblen Materials war das Einsetzen und meines gedruckten Teiles einfach, es ist bisher seit einigen hundert Kilometern in Benutzung. Die Oberfläche des abgebildeten Teiles ist unschön, sorry, weil ich es eilig hatte, das neue Rad mit in Urlaub zu nehmen.

Print Settings
Printer brand:
Prusa

Printer:
I3 MK3S+

Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Filament brand:
Spectrum

Filament material:
TPU