1 / 1
infimech tx bambulabs a1mini quick change nozzle adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
model to adapt a quick change nozzle from bambu labs
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 33
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
this is a work in progress. the product does function as it is. all holes are tapped by the screws when putting it together. currently i have printed in asa and it worked but did eventually fail.
Printed horizontal with supports if printed vertical it will fail from my experience.
Used the heating parts from Bambu just cut the connector off and used to clamp them in. Ferrule is recommended but can work without. Can use the stock housing, but the part cooling is a little high and new ducts will need to be printed.
remix please. help make this better~!