Viper's Wide XR Footpads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Onewheel XR+ Fitment. Requires 262+ mm wide printer. Or Printed vertically and 45 degrees on a smaller printer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are my low and wide Onewheel XR+ compatible footpads.
They are roughly 7mm of concave and a little more kick. They feel fairly flat. For reference, the "lowboy flared" pads are a similar size but something like 10 to 12mm of concave and kick.
You will have to print this vertically and rotated 45 degrees if your printer is 256mm bed size. I usually add some tree supports to help stabilize it. If you have a larger printer it can be printed flat.
Fair warning, if you print this vertical out of a flexible or semi-flexible material it will most likely fail.
I recommend PETG, PETG-CF / GF, PBT-GF
Some grip tape may not like to stick to PAHT-CF
The print has modeled threads for these inserts:
https://www.amazon.com/dp/B002WC8TU2?th=1
Style: 0.394" L 10-32 Internal Threads | Size: Hex"