Peg Perego Ground Force Power Winch Adapter / Seilwinde
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.81 – €9.55 net (excluding VAT)
For file: 20251228_PegPeregoHitch-Winch-Adapter-V2_0.4n_0.2mm_PETG_MK4S_6h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.68 excluding VAT (range midpoint).
- Weight reported by the author
- 169 g
- Print time reported by the author
- 6.33 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter für Seilwinde / Adapter for winch
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hier findet Ihr ein Modell eines Adapters für meine PegPeregoAnhängerkupplung um auch an dieser die originale Seilwinde verwenden zu können.
Gedruckt wurde das ganze aus PETG auf einem Prusa MK4S mit Stützmaterial.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
Here you'll find a model of an adapter for my PegPerego trailer hitch, allowing me to use the original winch with it as well.
It was printed in PETG on a Prusa MK4S with support material.
Have fun printing! If you like the model, I would be happy if you leave me a like
Link zur Anhängerkupplung / link to trailer hitch: