Water Bottle Drying Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drying stand for water bottles. While it was designed for bicycle water bottles, it will work for others.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 28
- Makes
- 1
- Views
- 196
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I had tried other water bottle drying stands, but many of them weren't stable enough for my larger water bottles, or they didn't fit the opening of my water bottles very well. So, I created this two-piece, interlocking drying stand that works well for my purposes. Perhaps it will work for you, too.
I recommend printing in white (or another light color) so that you can tell if any mold/mildew starts to develop. These are easily cleaned, but as with most 3D printed items, layer lines provide opportunities for things like this to develop.
You will need to print (1) Upper and (1) Lower piece. I printed them in PETG for UV resistance given that these might sit in an area that gets sunlight. I also increased the perimeters to 6 so that it is all perimeter loops with no infill. With these settings, a complete stand takes about 45 minutes.
Print Settings:
Material: PETG (white)
Perimeters: 6
Layer Height: 0.3 mm
The original FreeCAD file is provided if you wish to modify it in any way. Or, you can simply import the STEP files into your slicer and print!