Fractal Design Ridge - Low Profile C13 PSU Cable Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fractal Design Ridge - Low Profile C13 PSU Cable Holder for Thermalright AXP120-X67 or similar
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
The Fractal Design Ridge is a fantastic compact ITX case, but if you're using a large low-profile CPU cooler like the Thermalright AXP120-X67, you'll quickly discover that the stock C13 PSU cable holder fouls against the cooler. The original holder's internal shoulder extends too far into the case, making it physically impossible to install both components simultaneously.
This is a reverse-engineered replacement for the stock C13 female PSU cable holder, modified with:
Reduced internal shoulder depth — allows clearance for tall CPU coolers
2-clip retention design — maintains secure cable retention while reducing overall footprint
Direct drop-in replacement — uses the original mounting points and hardware
The holder maintains full functionality for your C13 power cable while sitting flush enough to coexist with aftermarket cooling solutions.
Compatibility:
Case: Fractal Design Ridge
Tested with: Thermalright AXP120-X67 (67mm height)
Likely compatible with: Other tall/wide low-profile coolers that conflict with the stock holder
Hardware Required:
2x original mounting screws (reused from the stock holder you're replacing)
Print Settings:
Material: PETG or ASA recommended (heat resistance near PSU)
Layer height: 0.2mm
Infill: 30-50%
Supports: Required for the cable retention latches
Orientation: Print with the flat mounting face down
Dimensions:
Approximately 49.5 × 29 × 24 mm
Designed as a functional replacement part. If this solved your clearance issue, a like or make is always appreciated!