1 / 3
IKEA Billy Legs/Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just 4 "feet/stands" for a Billy shelf (20mm width) to make it into an elevated shelf or a small table.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 92
- Makes
- 1
- Views
- 1,476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I had wasted space inside my cabinet and wanted to use only half width.
These were made with 4mm thick walls which add 8mm to both the length and width, but it'll still fit inside the cabinet (even if by increasing the door clearance.
Printing:
- Material: PLA (strong enough for me)
- Quality: 0.25mm DRAFT
- Infill: 15%
- Supports: Probably not really required (I used anyway for the screw holes)
Using:
These will fit both Billy shelf widths (36cm/76cm) or others with 2cm width.
I didn't feel the need to screw mine. Any 3-4 mm screw with 16mm and a countersunk head should work fine.