Australian Quiptron Filtrite Sk950 SKB900 Filter Skimmer Basket Top 190 / Height 120 / Bottom 150
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ton of Australian Pools have this skimmer box.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v2.0
100 % infill
PetG
Do not use PLA or you will be replacing it really quick like I did on one of the earlier tests
brim
Top width 190
Bottom width 150
Height is 120 (the original is 125 but 120 seems to be snug)
This is wider than the store bought one at the base but takes way more debris
It fits snug
The quiptron skimmer well (sometimes called skimmer housing or skimmer throat) has fins that keep this basket away from the wall so the water will flow through the holes and down between the filter basket and the skimmer well.
There is 3 versions here
The first = no handle = you cut a piece of brass pipe and slip it in = you hanv a handle made of brass
The second has the handle
The third is the cura project file and has the handle so you don't have to add a blocker.
Be warned 1 day of printing
Brim = skirt (both inner and outer trust me)
Use adaptive layers in Cura (it is in the experimental settings)
Adaptive Layers Max var = 0.08 mm
Adaptive layers variation spet size 0.04
Adaptive Layers Topography size 0.2
This is designed to be used without supports except the top handle
For Cura: Put one support blocker under the handle
Then change that support blocker to fill in the button above it
Then resize the support fill
Bam the handle is supported
Like the original the sacraficial outside support for the upper lip just tears away
