Buddy Hex Fomer for Prusa Buddy Camera - Prusa XL / MK4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesigned case for the Prusa Buddy camera featuring a cool hexagon-style design that improves the original look!
- Rating
- 0 / 5
- Likes
- 2
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
This redesigned case for the Prusa Buddy camera focuses on both aesthetics and usability. The original Prusa case has been improved with a cool hexagon-style design that better matches Prusa’s visual identity.
The new housing allows a negative tilt, making it much easier to properly frame and monitor your prints. All original components are reused with no modifications required, including the speaker, microphone, PCB, motors, and screws.
The model is easy to print in PLA and features a versatile base that can be mounted using screws or 3×8 mm magnets, offering flexible installation options.
Key features:
Improved hexagon-style design inspired by Prusa aesthetics
Negative tilt for better print framing
Reuses all original Prusa Buddy camera components (no modifications)
Easy to print in PLA
Base compatible with screws or 3×8 mm magnets
Print settings:
The model is designed for easy printing and works perfectly in PLA, but other common materials can also be used. All parts can be printed without supports, making the print straightforward and reliable, even for beginners.
A ready to print 3mf with all parts is available.

Design:
I made the design on Solidworks:
![]() | ![]() | ![]() |
|---|
Assembly:
Step 1:
Disassemble the original Prusa Buddy camera. Be careful not to lose the screws, as they are very small.

Note: There is screw below bottom pad.
Step 2:
Reinstall the components into the upper shell and mount the PCB and reconnect the existing components. Make sure the motor is connected to the correct port and pay attention to cable orientation.
![]() | ![]() |
|---|
Step 3:
Install the components into the lower shell. Do not forget to insert the magnets if needed.
Close the assembly with the lower cover. Pay attention to cable orientation.
![]() | ![]() |
|---|
Step 4:
Reinstall the original camera servo bracket.

Step 5:
Connect the last two components as shown in the reference photo.
Position the upper and lower shells as shown in the photo and assemble them together, paying attention to cable routing.
![]() | ![]() |
|---|
EDIT: Install the side cover before the next step.
Step 6:
Close the assembly with the top cover. Pay attention to not pinch cable.
Final result on XL:
![]() | ![]() |
|---|
Note: In Prusa Connect, the camera must be rotated by 180° to display the image correctly.










