AppleWatch charger clip-on for 2-in-1 Anker charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little clip-on stand to attach the standard Apple Watch charger to a 2-in-1 Anker charger.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Not wanting to buy a new 3-in-1 charger, I designed this little clip-on stand to attach the standard AppleWatch charger to my 2-in-1 Anker charger. It could possibly be also used on other chargers with a vertical rod, but I have not tried this.
I designed this on purpose with very small tolerances for a tight pressure-fit - but depending on your printer, this might be too tight, so you might have to scale the model a bit - or change the dimensions in the included Fusion design file (most important lengths are defined as user parameters). You could also change the distance from the main rod, or the angle of the attached charger - but it's possible that you'll have to fiddle with the design a bit then, as I have not tested it with all possible variations.
I printed this in PETG (which I highly recommend, as PLA might break when you try to fit it onto the rod), with a 0.8mm nozzle - but it should of course work well with a regular 0.4mm nozzle as well. No supports should be needed.