Vented top lid for HP T740 thin client
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a vented top lid for the HP T740 thin client with magnet attachments.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 79
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
This is a vented top lid for the HP T740 thin client, it is affixed with magnets to the metal underframe, this mod allows for better airflow.
This machine can get very warm when higher power draw expansion cards are installed or rack mounted via one of my rackmount adapters for 10 inch or 19 inch racks. this makes a huge difference.
Printing directions
You will need to select the correct pre-prepared 3mf files with correct magnet size for what you have. Please note that the lid files that use 3mm depth magnet are 1mm thicker then the lids with 2mm thick magnets, and as such will protrude sightly (0.5mm) from the stock plastics.
Step 1:
Select the correct pre-prepared 3mf files with correct magnet size for what you have, or want to use.
Step 2:
Select the modifier object that's been placed in the 3mf file
Step 3:
Verify that top and bottom shells are set to 0, this is also where you can change mesh density and pattern if so desired.
Step 4:
slice the plate, and check the preview, it should look something like this,
