Ikea DRÖNA - Label holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.64 net (excluding VAT)
For file: labelHolder_0.4n_0.28mm_PLA_COREONE_54m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 54 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ikea DRÖNA - Label holder 5.9x3cm
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I baught plenty of Ikea DRÖNA, and I wanted to have some label to easily know what is inside of which one. The label holder is a bit tall, but I wanted it to be the same height than the ribbon of the DRÖNA.
The pocket for the label is 6x3cm, I would recommend to make the label 5.9mm wide to slide more easily.
Print the label holder on its small side, it doesn't need any support.