Ubiquiti G6 Entry doorbell 45 Degree wedge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
45 Degree wedge for the new Ubqiuti G6 Entry doorbell camera.
- Rating
- 3 / 5
- Likes
- 10
- Downloads
- 197
- Makes
- 1
- Views
- 838
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
45 Degree wedge for the new Ubqiuti G6 Entry doorbell camera.
The included 20 degree just isnt enough for my location.
Im still not very good at 3D modelling but this item is quite simple, worked very well and fits great.
Comes with 2 files. Ones a standard 45 degree wedge and the other file has some extra sections i used to cover some holes on my wall. Print whichever version you want.
I'd recommend at least 50% infill so the bracket screws have something to bite into.
You will need 2x self tapping screws for the Ubiquiti bracket to screw to the wedge. Or if you have them you can sink in some threaded inserts into the outer locating pins and use the included m2/3 machine screws.
Use some flush cutters to cut off the locating pins which are used for the screws (outer 2)