Dental Curing light replacement battery holder for Premium Plus C02-D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The base of my dental curing light broke so I made a replacement one. This is a replacement battery holder to fit the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
The base of my dental curing light broke so I made a replacement one.
This is a replacement battery holder to fit the Premium Plus C02-D dental curing light. To use, remove the old battery holder by slipping out the old battery on the base and flexing out the thin plastic disc cap over the battery. The battery can then be slid out of the housing and reinserted into the new housing. The new printed cap will fit over the end of the battery to secure in place. The original housing has a small screw that attached the battery PCB to the plastic housing. The plastic around my one had already fractured and I found that it was not required to secure the replacement 3D printed one.
Slim chance that anyone else will need this rare and unique part but you never know!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: Generic PLA Grey How I Designed This ===================
Designed on Fusion 360 by measuring the original part and replicating.
Category: Parts